Technique on the Ether Field of the Permanent Magnet

In the 1980s, a significant invention was suppressed: a motor with an integrated generator. Although nominally a motor, its primary purpose is to generate electricity. This innovative device was created by Wilhelm Muller.
As you know, an induction motor creates the rotation of the rotor, which is a magnet, when the stator coil is activated by an alternating current. This type of motor is brushless.

Wilhelm Muller used two coils to promote the rotation of the magnet via a pulse signal. Inside this motor, there are seven other coils to generate electricity.

Summary of Wilhelm Muller's invention: Lenz's induction motor with integrated force-delay generator.

You may not be able to visualize the Muller motor, so you can see this demonstration link: https://www.youtube.com/watch?v=IxM22YWSOus | OR: https://youtu.be/jKzY2fj5NDE (Muller Dynamo generator coil voltage increase discovery)

The motor has two discs positioned opposite and symmetrical to each other, connected by a rotor disc with an attached magnet. Each disc has nine coils on two opposite sides of the magnet disc, but only eight magnets. Thus, two coils act as induction motors, while the remaining seven coils function as induction coils of the AC generator.

Two Important Factors:

1. In a conventional generator, when the coil starts to generate voltage, it becomes an electromagnet with a magnetic flux that opposes the increasing magnetic flux caused by the rotating rotor magnet. This opposition requires the generator to overcome resistance, known as the Lenz force.

2. Wilhelm Muller used two permanent magnets applied to two symmetrical coils across the rotating disc. These magnets attract each other but repel the magnet in the middle of the rotor, creating a new Ether field model and reducing the Lenz force acting against the rotor magnet during voltage generation.

Consider the Following Cases:

1. Lenz Force = 0: In this scenario, there is no obstacle to the rotor's rotation. The rotor is driven by an electric pulse from the coil with the Hall sensor. Assuming this force is Fc, Fc will cause the rotor disc to accelerate (according to Newton's law, a=F/m). However, Fc will be 0 when the rotor reaches its maximum speed. This phenomenon cannot be explained by Newtonian physics or quantum mechanics but can be understood through Ether physics, although it is a complex issue.

2. Lenz Force > 0, but quite small: Here, we call the Lenz force Fnz. The system will accelerate when Fc is greater than Fnz (Fc > Fnz), or Fc−Fnz>0.

This condition is essential for generating free energy!

I will leave the invention document for your reference, along with drawings created by members of the Overunity community to simulate this concept (the drawings are very detailed and colorful):

• Retrieved resources: Wilhelm Muller Motor Documentation

• Beautiful drawing recounts: Top Magnetic Generator

This example demonstrates how to reduce or eliminate the Lenz force in a generator to create a free energy generator.

Comments and Conclusions:

The input is supplied to two coils to promote the rotor like an induction motor. It uses a battery with a small voltage and consumes very little electricity. When the machine is running, the switch for the two control coils can be connected to the contact (with AC to DC switching) output of the generator, or the output energy can be used to recharge the battery. This eliminates the concern of running out of battery power!

It is possible to replace the movement of the magnet disc with fixed coils, activated by AC voltage pulses applied by a 555 timer. Although this setup is more complicated, the voltage will not reach high values like a mechanical turntable, as the rotor disc is accelerated by a net force. This acceleration to a certain speed results in zero net force, which is the advantage of a mechanical turntable. Therefore, the magnet motor with an integrated generator remains preferred by many free energy engineers.

Wilhelm Muller's method reduces or eliminates back electromotive force (Lenz force). In terms of Ether physics, this is an example of Ether Engineering, which includes the mathematics of velocity, the change of magnetic flux, and the change of the geometry of magnetic induction.

Modern education has eliminated the theory of Ether electricity, leading to a lack of significant inventions since 1930. This situation is a result of the new world order establishing political influence in science to achieve market mechanism goals and complex social structures dependent on large forces, including the government.

Finally, I propose a blueprint for creating an easy AC generator, along with many other methods that have been studied: Generates Energy-On-Demand: 👉 Free Energy Will Change Our World Forever.