Technical Committee on Electrical Equipment in Chemical Atmospheres

Technical Committee on Electrical Equipment in Chemical Atmospheres

There are only three actions a TC can take at the First Draft (ROP) meeting:

1. Resolve a Public Input (no change to the document)
2. Create a First Revision (change to the document)
3. Create Committee Input

Resolve Public Input (no change to the document)

• TC must provide a response (Committee Statement/CS) to ALL Public Input (proposal).
• CS for not doing what is suggested
• Sample Motion: “I make a motion to resolve PI#_ with the following committee
• statement__.” Approval by meeting vote (simple majority). Not subject to Ballot.

Create a First Revision (change to the document)
TC must create a First Revision (FR) for each change they wish to make to the document,
either using Public Input for the basis of the change or not using a Public Input for the
basis. One or more Public Input can be considered for the FR.
 All Public Input requires a response
TC can use a Public Input for basis
Sample Motion: “I make a motion to revise section __ using PI#_ as the
basis for change.” Approval by meeting vote (simple majority) and final
approval through ballot.

TC develops revision without a Public Input for basis
Sample Motion: “I make a motion to revise section __ as follows___.”
Approval by meeting vote (simple majority) and final approval through
ballot.

First Revisions require a committee statement

Committee Input
TC may create a Committee Input (CI). This replaces the old system “rejected” Committee
Proposals. CIs will get printed in the report but will not be balloted or shown as a change
in the draft. CIs are used to solicit public comments and/or as a placeholder for the
comment stage.

Sample Motion: “I make a motion to create a CI with a proposed revision
to section__ as follows___.” Approval by meeting vote (simple majority).
Not subject to ballot.

Requires a committee statement to explain the intent of making a CI.

Free Energy From Static Electricity - Atmospheric electricity

Would you like to generate electricity for your home month after month, without paying hefty electricity bills? If so, free energy systems have the perfect answer for you. There are a range of free energy products that can be used to generate electricity for your home from free resources. These devices are based on a wide variety of principles. In fact, there are numerous devices invented by energy enthusiasts around the world. Some of these techniques have been refined and modified for maximum efficiency and consistency.

One of the devices uses static electricity around us to produce usable electricity for your home. Our atmosphere always contains electrostatic charges. With proper equipment, these static charges can be harnessed to produce electric current.

The following is a device that you can construct yourself to illustrate the concept of free energy from static electricity. A long wire acts as the main absorber of electrostatic charges in the atmosphere. This wire must be laid out without touching any other conductor, either vertically, or in an S shape if space is a constraint. You can use nylon thread to insulate ends of the wire to ensure that the wire does not touch any other conducting material. The longer the wire is, the more the charge collected; and similarly, the higher the wire is placed, the more the charge gathered.

Once the wire has been installed correctly, you must use additional components to convert the static electricity into current electricity. The wire is connected to a spark plug, a condenser, an ignition coil, a diode, and a battery, with some of the components grounded. These elements allow the static charges to be stored in the battery, which can be connected to your household circuit to generate electricity for your home. You can improve the efficiency of this device by several tweaks, such as using a rectifier instead of a diode, and so on.

The amount of electricity produced depends a lot on weather conditions, as the amount of electrostatic charges on the atmosphere depends on the weather. A lot of wind increases the efficiency of the devices, but humidity in the atmosphere makes the device less efficient. The device serves to demonstrate the proof of concept of free energy systems that generate electricity for your home using static electricity as the energy source.

Atmospheric electricity:  Nikola Tesla: Atmospheric electricity - Wireless Power Transmission

Special Note: Posting of this document on Blog does not imply approval or disapproval by the Department of Energy. This work is made available to illustrate innovative energy research by multiple researchers involving new concepts. Scientific method requires replication and independent test and verification, and an additional research prototype build-up for those purposes is presently underway by the authors.

 Revealed At Last: Ancient Invention Generates Energy-On-Demand

✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator

Generates Energy-On-Demand: Easy Power Plan Will Change Our World Forever

✔ Currents are 180 out of phase with each other, Lenz's law naturally is broken
✔ Principle of Resonance to achieve Overunity

Learn more:
Exploiting Electricity from the Earth's charge - Wireless Power Transmission
Magnet Motor Generator Plans, Drawings & Comments - Yannick Van Doorne