Tesla Generator Homemade - Luminiferous Aether - Aether Engine
https://homemade-generator-tao.blogspot.com/2019/12/tesla-generator-homemade.html
Foreword for Tesla Generator Homemade: If you haven't heard about Nikola's Secret free electricity generator then maybe someone was doing their job. You weren't supposed to hear about it, but Tesla had plans to release many inventions. After saying that he could develop a device that used surrounding energy as a fuel source, his large investors backed off knowing that these device could threaten the large energy companies.
The withdrawal of funding from Tesla's projects caused the immediate halt of all this future endeavors including the Tesla generator which is remained hidden for 90 years. Recently a discovery was found from Tesla's private files confiscated by the government which showed plans to build a free energy device anyone could use and build within the comfort of their home.
Tesla grew furious with his main competition the energy company in the US government. He briefly made the announcement that he was working on plans to make the aforementioned device. When large investors caught wind, they knew it would come to their private investments in the energy sector calling them to lose money.
Eventually Nikola Tesla's lab and everything in it was confiscated and seized and never released. Due to his bad financial planning Nikola Tesla passed away very poor man. However his contributions to the modern world would have made him a billionaire.
The principle of operation of the AC generator is based on the phenomenon of electromagnetic induction. In contrast to a DC generator, the rotor of the generator contains magnets and rotates around the shaft, on the rotor contains coils to generate electricity. There are many other technical issues about the AC generator, but it is not of much interest. Because AC generators have been taught in schools, and these generators are available on the market a lot.
A homopolar generator is a DC electrical generator comprising an electrically conductive disc or cylinder rotating in a plane perpendicular to a uniform static magnetic field. A potential difference is created between the center of the disc and the rim (or ends of the cylinder) with an electrical polarity that depends on the direction of rotation and the orientation of the field. It is also known as a unipolar generator, acyclic generator, disk dynamo, or Faraday disc.
The special thing of homopolar generator:
The voltage is typically low, on the order of a few volts in the case of small demonstration models, but large research generators can produce hundreds of volts, and some systems have multiple generators in series to produce an even larger voltage. They are unusual in that they can source tremendous electric current, some more than a million amperes, because the homopolar generator can be made to have very low internal resistance. Also, the homopolar generator is unique in that no other rotary electric machine can produce DC without using rectifiers or commutators.
Tesla and Self sustaining current:
Tesla did not have a material a thousand times more conductive than copper, neither was he able to spin a disk at the ultra-high speeds needed to produce such a current, nor did he plan on using a piece of rotating metal several miles in diameter.
What he did was to use energy that is usually wasted in a generator and turn it into a source of power.
First, he used a magnet that was bigger in diameter than the disk so that the magnet completely covered the disk.
Second, he divided the disk into sections with spiral curves radiating out from the center to the outside edge.
In the Faraday unipolar generator "the current," as Tesla noted,
"set up will therefore not wholly pass through the external circuit ... and ... by far the greater portion of the current generated will not appear externally..."
Tesla’s modifications to the basic Faraday Generator also known as a unipolar generator:
By having the magnet completely cover the disk, Tesla made use of the whole disk surface in current generation instead of only a small section directly adjacent to the bar magnet, as happened in the Faraday device.
This not only increases the amount of current generated, but, by making the current travel from the center to the outside edge, makes all of that current accessible to the external circuit.
It is this reaction that works to cancel out whatever effort goes into causing the original action. In an electrical system if there are two turns of wire wound next to each other and a current is sent through the wire, the current passing through the first loop will set up a magnetic field that will work against the current passing through the second loop.
The spiral divisions in the disk cause the current to travel the full radius of the disk or, as in his alternative version of the generator, to make a full trip around the outside edge of the disk.
Because the current is flowing in a large circle at the rim of the disk, the magnetic field created by the current not only does not work against the field magnet above the circular plate, as in conventional generators, but it actually reinforces the magnet.
So as the disk cuts the magnetic lines to produce a current, the current coming off of the disk strengthens the magnet, allowing it to produce even more current.
Like conventional direct current generators, the unipolar dynamo also functions as a motor if current is put into the disk while under the magnet, and this seems to be the last element that could make the device self-sustaining, that is, capable of generating a current after being disconnected from an outside source of movement like falling water or steam.
Note:
EMF = Electromotive force
Back EMF = Counter-electromotive force
Both a generator and a motor disk are mounted in the magnetic enclosure. As the disks gain speed, current is produced which, in turn, reinforces the magnets, which cause more current to be generated.
That current is, likely, first directed to the motor disk which increases the speed of the system. At a certain point the speed of the two disks is great enough that the magnetic field created by the current has the strength to keep the dynamo/motor going by itself.
What process might have kept the unipolar dynamo operating after the powered start-up is speculation at this point, however two features of the generator are significant.
First, when a resistive load, like a light bulb is added to the circuit, it lowers the voltage at the center of the disk. This lower voltage at the center means that there is a greater difference in voltage between the center and the outside edge of the disk than there was before the light bulb was added. As the difference between the center and the outside increases, the dynamo works harder and makes more current.
Second, yet more important, the dynamo takes either very little, or no energy to keep going because the current coming off the generator is doing double duty. The current makes the bulb glow, but on its way from the generator to the filament in the bulb, it travels a path that adds to the momentum of the dynamo and, therefore, consumes energy at a very low rate. The process continues , it would seem, until heat losses in the filament equal the rotational energy of the generator's flywheel.
In terms of Elsasser's criteria for a self-sustaining generator, the Tesla unipolar dynamo comes closest to satisfying the condition of a better electrical conductor.
It is not that a new material is used, but a new geometry is applied so that the current does not create its own opposing forces. This is similar, but not equivalent, to having a better conductor.
Whether or not the dynamo is in fact a "fuelless" generator it appears to be an ingenious feat of engineering that takes one of the basic principles of nature, an equal and opposite action for every action, and turns it, by the use of a novel circuit geometry, into a reaction that is additive to the original action.
Instead of the opposite reaction slowing down the system that created it, the reaction adds energy to the system.
But many scientists use a way of removing EMF back and breaking the system's magnetic symmetry. They all mention Nikola Tesla in their solution. Perhaps it is the thought of getting rid of EMF again that I mentioned above.
The overall creations of every magnetic field, including the ones within the rotor itself, are carefully positioned. When the electrical conducting and magnetic rotor enters the "field" and begins to move all conditions change! The track rail (stator) is also an electrical conductor (static field) and the Moving Dual Permanent Magnets induce a Motional EMF and cause currents to flow.
Yes, this creates an electromagnetic field, actually several. The first is the space-filling electric field generated by a changing magnetic field, the second is the electric field inside a conductor when it moves through a magnetic field. These two forces join to create an asymmetric situation. This allows a torque that is in our favor; the first imbalances in the symmetry have begun!
Yet another is the magnet alloy material rotating through its own magnetic field, which does not rotate with the physical elements. A rotating conductive magnet is detectable by the electric field produced when its free charges separate radially, due to the force produced by rotation of the conductor within its own magnetic field. All of these actions are taking place simultaneously. The spinning and the movement is magnetically induced and sustained just as in nature. The likeness of a universal macro effect dynamo has been created at a micro scale with numerous asymmetrical induced changes.
The magnetic field and electric field are inseparable. I would go so far as to say they are virtually the same entity, yet they do coexist. It's another dichotomy that stretches the limitations of the human mind. Duality of energetic matter allows formations to simultaneously occupy two different realms.
Two mutually exclusive characteristics. Using Special Relativity, the electric and magnetic fields are two aspects of the same thing. A changing magnetic field is mathematically the same as a moving magnetic field. So part of it is manifested as an electric field component. It's apparent this multiple existence is not limited to two only fields of energy, but many fields simultaneously.
The relative motion is quite a significant factor. A time varying magnetic field creates an electric field, and the induced current within the electric field creates a magnetic field. This electromagnetic field interacts with the permanent magnet just as another PM would. The moving magnet assemblies create a virtual electromagnet, when it moves within the correct proximity of a conductor.
A force between a permanent-magnet and a permanent-magnet can be made equivalent to that between current-element and current-element. Continuous rotational motion is possible between multiple PMs, contrary to conclusions, which may seem to violate certain physics principals. As stated by Einstein, it is known that Maxwell's Electrodynamics, as understood when applied to moving bodies, leads to asymmetries, which do not appear to be inherent in the phenomena.
Combined forces create a uniform asymmetric field well exceeding the drag and preventing the magnetic lock-up. The effects of back-drag virtually cease to exist and lockup does not occur. As explained, the multiple dual sets of induced electromotive effects are due to the permanent magnets rotation, plus the rotor-conductors motion relative to the asymmetric stators permanent magnetic fields.
The process further reinforces the magnets, which cause more current to be generated. The electric currents, once started, are then sufficient to sustain themselves and even increase in strength and torque. The phenomenon appears to perform much as a natural dynamo or spiral in space does. If these actions actually eliminate the potential back-drag, or simply overcome this force is not certain - the results are the same.
Some scientists who study on generators use magnetism as the source of kinetic energy:
Joseph Newman: Zero Point Energy Of The Permanent Magnet
This article will list a separate category for Luminiferous Aether - Aether Engine below.
The dynamo would provide the energy to run a single machine, but his vision was to light cities and in the 1900 Century magazine article he elaborated on the theory of such a machine.
Imagine, he suggested, an enclosed cylinder with a small hole in it near the bottom. Let us say that this cylinder, he added, contains very little energy but that it is placed in an environment that has a lot of energy.
In this case, energy would flow from the outside environment, the high energy source, through the small opening at the bottom of the cylinder, and into the cylinder where there is less energy.
Also suppose that as the energy passing into the cylinder is converted into another form of energy as, for example, heat is converted into mechanical energy in a steam engine.
If it were possible to artificially produce such a "sink" for the energy of the ambient medium then,
"we should be enabled to get at any point of the globe a continuous supply of energy, day and night."
He continued, in the article, to elaborate on his energy pump but changed the image slightly.
On the surface of the earth we are at a high energy level and can imagine ourselves at the bottom of a lake with the water surrounding us equal to the energy in the surrounding medium. If a "sink" for the energy is to be created in the cylinder, it is necessary to replace the water that would flow into the tank with something much lighter than water.
This could be done by pumping the water out of the cylinder, but when the water flowed back in, we would only be able to perform the same amount of work with the inflowing water as we did when it was first pumped out.
"Consequently nothing would be gained in this double operation of first raising the water and then letting it fall down."
Energy, though, can be converted into different forms as it passes from a higher to a lower state.
He said,
"assume that the water, in its passage into the tank, is converted into something else, which may be taken out of it without using any, or by using very little power."
For example, if the energy of the ambient medium is taken to be the water, oxygen and hydrogen making up the water are the other forms of energy into which it could change as it entered the cylinder.
Corresponding to this ideal case, all the water flowing into the tank would be decomposed into oxygen and hydrogen ...and the result would be that the water would continually flow in, and yet the tank would remain entirely empty, the gases formed escaping.
We would thus produce, by expending initially a certain amount of work to create a sink for...the water to flow in, a condition enabling us to get any amount of energy without further effort.
Tesla recognized that no energy conversion system would be perfect, some water would always get into the tank, but,
"there will be less to pump out than flows in, or, in other words, less energy will be needed to maintain the initial condition than is developed [by the incoming water], and this is to say that some energy will be gained from the medium."
He found that this pumping could be done with a piston "not connected to anything else, but was perfectly free to vibrate at an enormous rate." This he was able to do with his "mechanical oscillator," a steam-driven engine used for producing high frequency currents. The faster the pump would work, the more efficient it would be at extracting energy from the cosmos.
Research along this line culminated in the oscillator demonstrated at the Chicago World's Fair in 1893.
Tesla’s Personal Exhibit at the 1893 Columbian Exposition Chicago, Illinois Tesla’s expertise with alternating currents and flair for showmanship educated the general public and insured his prominence in the electrical energy field. In addition to numerous demonstration motors, the booth was highlighted by the infamous “Egg of Columbus”in which a spinning egg illustrated the rotating magnetic field:
It was not until much later, in the 1900 article, he revealed:
"On that occasion I exposed the principles of the mechanical oscillator, but the original purpose of this machine is explained here for the first time."
It was also in 1893 that Tesla applied for a patent on an electrical coil that is the most likely candidate for a non-mechanical successor of his energy extractor.
This is his "Coil for Electro-magnets,". It is another curious design because, unlike an ordinary coil made by turning wire on a tube form, this one uses two wires laid next to each other on a form but with the end of the first one connected to the beginning of the second one.
US Patent 512,340 Coil for Electro-Magnets - Nikola Tesla - July 9, 1894:
In the patent Tesla explains that this double coil will store many times the energy of a conventional coil.
Preliminary measurements of two helices of the same size and with the same number of turns, one with a single, the other with a bifilar winding, show differences in voltage gain.
In below figure, the upper curve is from the Tesla design, the lower was produced by the single wound coil.
Preliminary measurements of two helices of the same size and with the same number of turns, one with a single, the other with a bifilar winding, show differences in voltage gain. The upper curve is from the Tesla design, the lower was produced by the single wound coil. The patent, however, gives no hint of what might have been its more unusual capability:
The patent, however, gives no hint of what might have been its more unusual capability.
Linde’s Condenser - An article - Illustrative image for "converts energy in Aether - Radiant Energy":
As Tesla said,
"This was the only experimental proof which I was still wanting that energy was obtainable from the medium in the manner contemplated by me."
What ties the Linde work with Tesla's electromagnet coil is that both of them used a double path for the material they were working with. Linde had a compressor to pump the air to a high pressure, let the pressure fall as it traveled through a tube, and then used that cooled air to reduce the temperature of the incoming air by having it travel back up the first tube through a second tube enclosing the first.
The already cooled air added to the cooling process of the machine and quickly condensed the gases to a liquid.
Tesla's intent was to condense the energy trapped between the earth and its upper atmosphere and to turn it into an electric current. He pictured the sun as an immense ball of electricity, positively charged with a potential of some 200 billion volts.
The earth, on the other hand, is charged with negative electricity.
The tremendous electrical force between these two bodies constituted, at least in part, what he called cosmic energy. It varied from night to day and from season to season but it is always present.
The positive particles are stopped at the ionosphere and between it and the negative charges in the ground, a distance of 60 miles, there is a large difference of voltage - something on the order of 360,000 volts.
With the gases of the atmosphere acting as an insulator between these two opposite stores of electrical charges, the region between the ground and the edge of space traps a great deal of energy.
Despite the large size of the planet, it is electrically like a capacitor which keeps positive and negative charges apart by using a non-conducting material as an insulator.
The earth has a charge of 90,000 coulombs. With a potential of 360,000 volts, the earth constitutes a capacitor of .25 farads (farads = coulombs/volts).
If the formula for calculating the energy stored in a capacitor (E = 1/2CV2) is applied to the earth, it turns out that the ambient medium contains 1.6 x 1011 joules or 4.5 megawatt-hours of electrical energy.
In order to tap this energy storehouse Tesla had to accomplish two things - make a "cold sink" in the ambient energy and devise a way of making the "sink" self-pumping.
Explaining how this process might have worked requires, again, speculation.
Such a "sink" would have to be at a lower energy state than the surrounding medium and, for the energy to continually flow into it, the "sink" would have to maintain the lower energy state while meeting the power requirements of the load attached to it. Electrical energy, watt-seconds, is a product of volts x amps x seconds. Because the period of oscillation does not change, either voltage or current has to be the variable in the coil's energy equation.
In that the double wound coil maximizes the voltage difference between its turns, it is probable that it is the current that is minimized to produce a low energy state in the coil. For the coil to be initially "empty" and at low energy would mean it operated at high voltage with a small amount of charge.
The coil, then, would be set into oscillation at its resonant frequency by an external power source. During a portion of its cycle the coil will appear to the earth's electric field as one plate of a capacitor. As the voltage across the coil increases, the amount of charge it can "sink" from the earth's higher energy field will increase.
The energy taken into the coil - through the "small opening" which appears to be the atomic structure of the conductor according to the physics of Tesla's time - is "condensed" into positive and negative components of current, a lower energy state relative to the originating field.
The current is equivalent to the water converted to gases in Tesla's description of the self-acting engine. The current would "escape" from the "sink" into whatever load was connected across the coil. The movement of current into the load would produce a strong magnetic field (the stated intention of the patent) which, when it collapsed, would, again, produce a high potential, low charge "sink" to couple with the earth's electric field.
Because the inflowing energy performs a double function similar to the unipolar generator, supplying current to the load and aiding the pumping function, the system's energy expenditure in moving charge is low, allowing the system to gain more energy from the medium than it expends in its operation. The coil needs no extra energy from an outside source to pump the energy it has extracted.
Energy would come directly from the sun.
A more modern view of such a device, should it prove to operate in this theoretical manner, would be to describe it as a self-oscillating capacitive system. Once the device is set into oscillation, very little power is expended in driving the load. Because it is an electrostatic oscillating system, only a small amount of charge moves through the load per cycle, that is, the coulomb per seconds = amps are low.
If the charge is used at a low rate, the energy stored in the capacitive system will be turned into heat at a slow rate enabling the oscillations to continue for a long period of time.
With his prominent position in the world of science at the time, it is curious why Tesla's invention was not commercialized or at least publicized more. Economics, not science, appear to have been the main factor. The adoption of alternating current was opposed by powerful financiers of the period.
Michael Pupin, another leading electrical researcher at the turn of the century, noted in his autobiography:
...captains of industry...were afraid that they would have to scrap some of their direct current apparatus and the plants for manufacturing it, if the alternating current system received any support... ignorance and false notions prevailed in the early nineties, because the captains of industry paid small attention to highly trained scientists.
Tesla's patents for electrical generators and motors were granted in the late 1880's.
During the 1890's the large electric power industry, in the form of Westinghouse and General Electric, came into being. With tens of millions of dollars invested in plants and equipment, the industry was not about to abandon a very profitable ten year old technology for yet another new one.
Tesla saw that profits could be made from the self-acting generator, but somewhere along the line he had pointed out to him the negative impact the device would have.
At the end of the section in Century where he described his new generator he wrote:
I worked for a long time fully convinced that the practical realization of the method of obtaining energy from the sun would be of incalculable industrial value, but the continued study of the subject revealed the fact that while it will be commercially profitable if my expectations are well founded, it will not be so to an extraordinary degree.
Years later, in 1933, he was more pointed in his remarks about the introduction of his fuelless generator. In the Philadelphia Public Ledger of November 2nd, is an interview with Tesla under the headline "Tesla 'Harnesses' Cosmic Energy."
In it he was,
"Asked whether the sudden introduction of his principle would upset the present economic system, Dr. Tesla replied, 'It is badly upset already.' He added that now as never before was the time ripe for the development of new resources."
It has been nearly a century since Nikola Tesla claimed a radically new method for producing electricity. The need for the development of new resources is greater now than at the end of the last century.
Perhaps these overlooked inventions will make his vision of "increasing human energy through the use of the sun's energy" become a reality.
Presuming, if Tesla was working with ZPE he used a different name for it, calling it Luminiferous Aether, it represented a more gaseous structure verses any electron particle phenomenon. He was not using any kind of generator, transferring mechanical energy to electricity; instead he called it an Aether engine, transferring Aether energy into electricity. His engine was technology to draw the Aether (ZPE) from space with a tower receiving device and transferring it under the ground deep to broadcast it throughout the Earth.
It being stupid to believe he would have ever considered it to be broadcasted in the air, it already existed in the air and would probably interact. This energy having no electron properties, therefore lacking its limitations also, no degeneration with distance, faster than the speed of light, transfers through everything; it has no physical properties at all. Tesla’s Aether verses ZPE could be nothing more than terminology, i.e. mine vs. harness, generator vs. engine. Physics likes to think the errored Michelson Morley experiment put an end to the Aether, which any 2nd grader could debunk the results, and now ZPE smelling a lot like what Tesla was developing his wireless energy with.
"Secrets of Cold War Technology" by Gerry Vasilatos (free pdf on line) explains his discovery of Ether, how it did not behave as electricity when he first separated it. How it could be amplified and then converted back into electricity.
In the court transcripts during the patent suit by GE/JPMorgan vs. Westinghouse/Tesla, Tesla testified that his Transformer amplified electricity 5,000 times, and was self-powered. (available on the PBS website) He also shifted the phase of magnetism passing through his motor, eliminating "lenz's law". Something TC Heins re-invented.
Aether, defines space... it is infinite and omnipresent. When Tesla created beams of Ether that was patterned after electricity, it was superliminal (traveled through Aether as if Aether is superconducting), and also like a venturi, drew more Ether into the propagating wave, he called them stationary waves to differentiate the compression Ether waves from RF transverse standing wave patterns.... So, Ether beams were transmitted instantly, and were self-amplifying while powered. No distance limitations of time delay or loss of energy.
A proper Tesla Coil is optimized to resonate the Ether waves, not electricity. Current designs used today based on RF waves are hopelessly doomed to fail to replicate his proven transmission distances which exceeded 25 miles. That was further than any wire transmission could pump AC power, his closest competitor. He understood, that no energy was lost through resistance, dissipation, or obstructions in those tests... The beams were actually self-amplifying... distance from source to receiver on the planet was irrelevant. Just as the Sun controls Pluto, distance is irrelevant.
Tesla's Radiant Energy - Cold Electricity from Tesla Coils:
It was a brief introduction video - a demonstration of a free energy program by a group of anonymous scientists.
Note. Some scientists are famous for free energy (still alive):
And more...
They work for private companies and write books for sale to engineers who study free energy.
Some famous people research on free energy - including Disciple of Tesla, you can see them here: https://ultimate-energizer.blogspot.com/p/free-energy-books.html - Bookstore and video about green energy
Tesla Generator Homemade by anonymous scientists - Disciple of Tesla:
You are about to visit a program for free energy researchers and ordinary people...
Revealed At Last: Ancient Invention Generates Energy-On-Demand
✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator
✔ Currents are 180 out of phase with each other, Lenz's law naturally is broken
✔ Principle of Resonance to achieve Overunity
The withdrawal of funding from Tesla's projects caused the immediate halt of all this future endeavors including the Tesla generator which is remained hidden for 90 years. Recently a discovery was found from Tesla's private files confiscated by the government which showed plans to build a free energy device anyone could use and build within the comfort of their home.
Tesla grew furious with his main competition the energy company in the US government. He briefly made the announcement that he was working on plans to make the aforementioned device. When large investors caught wind, they knew it would come to their private investments in the energy sector calling them to lose money.
Eventually Nikola Tesla's lab and everything in it was confiscated and seized and never released. Due to his bad financial planning Nikola Tesla passed away very poor man. However his contributions to the modern world would have made him a billionaire.
The main content of Tesla Generator Homemade:
- How many types of generators did Nikola Tesla invent?
- Generator converts energy in Luminiferous Aether - Aether Engine
- The blueprint for Tesla Generator Homemade by anonymous scientists - Disciple of Tesla
Introduction to Luminiferous Aether - Aether Engine:
Luminiferous Aether - Aether Engine: Ancient Invention Generates Energy-On-Demand
✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator
Generates Energy-On-Demand: Easy Power Plan Will Change Our World Forever
✔ Currents are 180 out of phase with each other, Lenz's law naturally is broken
Technology for Luminiferous Aether will be reviewed at the end of the article
A. How many types of generators did Nikola Tesla invent?
Tesla is famous for its mysterious technologies and is said to be outside of mainstream science today. But mainstream science and the military are still deciphering Tesla's ideas. Some of Tesla's inventions are held by the United States and Nazi Germany, but they are still continuing to develop and decipher Tesla's work.
As for Tesla's electrical technology, many scientists are quietly developing it. The famous inventions of Tesla Electric are not based on the theory of James Clerk Maxwell - the foundation of Electricity - Magnetism
Regarding Electricity, Tesla has at least three types of generators, one of which belongs to mainstream science.
The main content of 3 types of Tesla Generator Homemade:
- AC generator - improved Thomas Edison generator
- The generator maintains itself by eliminating EMF
- Luminiferous Aether - Aether Engine
1. AC generator - improved Thomas Edison generator
The first type - the AC generator is of orthodox science, and it is widely used today. This type of generator competes with Thomas Edison DC generator. See details: Homemade Generator Science ProjectThe principle of operation of the AC generator is based on the phenomenon of electromagnetic induction. In contrast to a DC generator, the rotor of the generator contains magnets and rotates around the shaft, on the rotor contains coils to generate electricity. There are many other technical issues about the AC generator, but it is not of much interest. Because AC generators have been taught in schools, and these generators are available on the market a lot.
2. The generator maintains itself by eliminating EMF
Initial event: Homopolar generator
Faraday disk, the first homopolar generator:
The special thing of homopolar generator:
- Generate low voltage
- High current
The voltage is typically low, on the order of a few volts in the case of small demonstration models, but large research generators can produce hundreds of volts, and some systems have multiple generators in series to produce an even larger voltage. They are unusual in that they can source tremendous electric current, some more than a million amperes, because the homopolar generator can be made to have very low internal resistance. Also, the homopolar generator is unique in that no other rotary electric machine can produce DC without using rectifiers or commutators.
 |
| Faraday Generator with electromagnet |
Tesla and Self sustaining current:
Tesla did not have a material a thousand times more conductive than copper, neither was he able to spin a disk at the ultra-high speeds needed to produce such a current, nor did he plan on using a piece of rotating metal several miles in diameter.
What he did was to use energy that is usually wasted in a generator and turn it into a source of power.
Tesla's design - UNIPOLAR DYNAMO
Tesla's design varied from that of Faraday in two major ways.First, he used a magnet that was bigger in diameter than the disk so that the magnet completely covered the disk.
Second, he divided the disk into sections with spiral curves radiating out from the center to the outside edge.
In the Faraday unipolar generator "the current," as Tesla noted,
"set up will therefore not wholly pass through the external circuit ... and ... by far the greater portion of the current generated will not appear externally..."
Tesla’s modifications to the basic Faraday Generator also known as a unipolar generator:
By having the magnet completely cover the disk, Tesla made use of the whole disk surface in current generation instead of only a small section directly adjacent to the bar magnet, as happened in the Faraday device.
This not only increases the amount of current generated, but, by making the current travel from the center to the outside edge, makes all of that current accessible to the external circuit.
Eliminating the Back EMF (Counter-electromotive force)
More importantly, these modifications on the Faraday design eliminated one of the biggest problems in any physical system - the reaction to every action.It is this reaction that works to cancel out whatever effort goes into causing the original action. In an electrical system if there are two turns of wire wound next to each other and a current is sent through the wire, the current passing through the first loop will set up a magnetic field that will work against the current passing through the second loop.
The spiral divisions in the disk cause the current to travel the full radius of the disk or, as in his alternative version of the generator, to make a full trip around the outside edge of the disk.
Because the current is flowing in a large circle at the rim of the disk, the magnetic field created by the current not only does not work against the field magnet above the circular plate, as in conventional generators, but it actually reinforces the magnet.
So as the disk cuts the magnetic lines to produce a current, the current coming off of the disk strengthens the magnet, allowing it to produce even more current.
Like conventional direct current generators, the unipolar dynamo also functions as a motor if current is put into the disk while under the magnet, and this seems to be the last element that could make the device self-sustaining, that is, capable of generating a current after being disconnected from an outside source of movement like falling water or steam.
Note:
EMF = Electromotive force
Back EMF = Counter-electromotive force
Self-Running Mode of Operation
Rotation is started by, say, a motor powered by line current.Both a generator and a motor disk are mounted in the magnetic enclosure. As the disks gain speed, current is produced which, in turn, reinforces the magnets, which cause more current to be generated.
That current is, likely, first directed to the motor disk which increases the speed of the system. At a certain point the speed of the two disks is great enough that the magnetic field created by the current has the strength to keep the dynamo/motor going by itself.
What process might have kept the unipolar dynamo operating after the powered start-up is speculation at this point, however two features of the generator are significant.
First, when a resistive load, like a light bulb is added to the circuit, it lowers the voltage at the center of the disk. This lower voltage at the center means that there is a greater difference in voltage between the center and the outside edge of the disk than there was before the light bulb was added. As the difference between the center and the outside increases, the dynamo works harder and makes more current.
Second, yet more important, the dynamo takes either very little, or no energy to keep going because the current coming off the generator is doing double duty. The current makes the bulb glow, but on its way from the generator to the filament in the bulb, it travels a path that adds to the momentum of the dynamo and, therefore, consumes energy at a very low rate. The process continues , it would seem, until heat losses in the filament equal the rotational energy of the generator's flywheel.
In terms of Elsasser's criteria for a self-sustaining generator, the Tesla unipolar dynamo comes closest to satisfying the condition of a better electrical conductor.
It is not that a new material is used, but a new geometry is applied so that the current does not create its own opposing forces. This is similar, but not equivalent, to having a better conductor.
Whether or not the dynamo is in fact a "fuelless" generator it appears to be an ingenious feat of engineering that takes one of the basic principles of nature, an equal and opposite action for every action, and turns it, by the use of a novel circuit geometry, into a reaction that is additive to the original action.
Instead of the opposite reaction slowing down the system that created it, the reaction adds energy to the system.
Generators use permanent magnets to generate kinetic energy.
I have not seen any literature that says Tesla uses two permanent magnet systems that repel each other to create the kinetic energy source for the generator. There are lots of YouTube videos about generators that use the thrust of two magnet systems, which then seem to move permanently.
Generators that use permanent magnet systems create kinetic energy and encounter the following obstacle:
- Magnetic symmetry
- EMF back - torque (Electromotive force)
Breaking Magnetic Symmetry
Developing Tesla's idea: Harnessing the energy of permanent magnets and amplifying energy:
The overall creations of every magnetic field, including the ones within the rotor itself, are carefully positioned. When the electrical conducting and magnetic rotor enters the "field" and begins to move all conditions change! The track rail (stator) is also an electrical conductor (static field) and the Moving Dual Permanent Magnets induce a Motional EMF and cause currents to flow.
Yes, this creates an electromagnetic field, actually several. The first is the space-filling electric field generated by a changing magnetic field, the second is the electric field inside a conductor when it moves through a magnetic field. These two forces join to create an asymmetric situation. This allows a torque that is in our favor; the first imbalances in the symmetry have begun!
Yet another is the magnet alloy material rotating through its own magnetic field, which does not rotate with the physical elements. A rotating conductive magnet is detectable by the electric field produced when its free charges separate radially, due to the force produced by rotation of the conductor within its own magnetic field. All of these actions are taking place simultaneously. The spinning and the movement is magnetically induced and sustained just as in nature. The likeness of a universal macro effect dynamo has been created at a micro scale with numerous asymmetrical induced changes.
The magnetic field and electric field are inseparable. I would go so far as to say they are virtually the same entity, yet they do coexist. It's another dichotomy that stretches the limitations of the human mind. Duality of energetic matter allows formations to simultaneously occupy two different realms.
Two mutually exclusive characteristics. Using Special Relativity, the electric and magnetic fields are two aspects of the same thing. A changing magnetic field is mathematically the same as a moving magnetic field. So part of it is manifested as an electric field component. It's apparent this multiple existence is not limited to two only fields of energy, but many fields simultaneously.
The relative motion is quite a significant factor. A time varying magnetic field creates an electric field, and the induced current within the electric field creates a magnetic field. This electromagnetic field interacts with the permanent magnet just as another PM would. The moving magnet assemblies create a virtual electromagnet, when it moves within the correct proximity of a conductor.
A force between a permanent-magnet and a permanent-magnet can be made equivalent to that between current-element and current-element. Continuous rotational motion is possible between multiple PMs, contrary to conclusions, which may seem to violate certain physics principals. As stated by Einstein, it is known that Maxwell's Electrodynamics, as understood when applied to moving bodies, leads to asymmetries, which do not appear to be inherent in the phenomena.
Combined forces create a uniform asymmetric field well exceeding the drag and preventing the magnetic lock-up. The effects of back-drag virtually cease to exist and lockup does not occur. As explained, the multiple dual sets of induced electromotive effects are due to the permanent magnets rotation, plus the rotor-conductors motion relative to the asymmetric stators permanent magnetic fields.
The process further reinforces the magnets, which cause more current to be generated. The electric currents, once started, are then sufficient to sustain themselves and even increase in strength and torque. The phenomenon appears to perform much as a natural dynamo or spiral in space does. If these actions actually eliminate the potential back-drag, or simply overcome this force is not certain - the results are the same.
Some scientists who study on generators use magnetism as the source of kinetic energy:
Joseph Newman: Zero Point Energy Of The Permanent Magnet
John Bedini: Free Energy Generation by John Bedini
3. Luminiferous Aether - Aether Engine
The truth about Tesla's free energy lies in its suppressed doctrine, the Aether doctrine and Radiant Energy.
Learn about free energy related to Aether and radiant energy: Tesla's Free Energy: Aether Theory - Radiant Energy
Tesla's concept of free energy is based on the Aether doctrine - which has been denied since the establishment of Michelson–Morley experiment. This experiment overturned Tesla's "word" on Aether. In fact, the meaning of Tesla's thesis about Aether has another implication: it is Aether that makes the speed of light constant in an inertial frame of reference. Later Einstein in general relativity also mentioned Aether again. However, there is no end to Aether and relativity.
According to the researchers, Tesla's free energy is radiant energy. Tesla's concept of radiant energy is not entirely identical to the concept of radiant energy in mainstream science. Radiant energy is part of the Aether doctrine. This is also a reason why Tesla's free energy concept is not legal.
In addition, there are many economic and political issues, along with some conspiracy theories, around Tesla's free energy. For more on free energy and Aether doctrine: Tesla's Free Energy: Aether Theory - Radiant Energy
This article will list a separate category for Luminiferous Aether - Aether Engine below.
B. Generator converts energy in Luminiferous Aether - Aether Engine
An Energy Extraction Device
Tesla, however, was not satisfied with his mechanical self-sustaining generator.The dynamo would provide the energy to run a single machine, but his vision was to light cities and in the 1900 Century magazine article he elaborated on the theory of such a machine.
Imagine, he suggested, an enclosed cylinder with a small hole in it near the bottom. Let us say that this cylinder, he added, contains very little energy but that it is placed in an environment that has a lot of energy.
In this case, energy would flow from the outside environment, the high energy source, through the small opening at the bottom of the cylinder, and into the cylinder where there is less energy.
Also suppose that as the energy passing into the cylinder is converted into another form of energy as, for example, heat is converted into mechanical energy in a steam engine.
If it were possible to artificially produce such a "sink" for the energy of the ambient medium then,
"we should be enabled to get at any point of the globe a continuous supply of energy, day and night."
He continued, in the article, to elaborate on his energy pump but changed the image slightly.
On the surface of the earth we are at a high energy level and can imagine ourselves at the bottom of a lake with the water surrounding us equal to the energy in the surrounding medium. If a "sink" for the energy is to be created in the cylinder, it is necessary to replace the water that would flow into the tank with something much lighter than water.
This could be done by pumping the water out of the cylinder, but when the water flowed back in, we would only be able to perform the same amount of work with the inflowing water as we did when it was first pumped out.
"Consequently nothing would be gained in this double operation of first raising the water and then letting it fall down."
Energy, though, can be converted into different forms as it passes from a higher to a lower state.
He said,
"assume that the water, in its passage into the tank, is converted into something else, which may be taken out of it without using any, or by using very little power."
For example, if the energy of the ambient medium is taken to be the water, oxygen and hydrogen making up the water are the other forms of energy into which it could change as it entered the cylinder.
Corresponding to this ideal case, all the water flowing into the tank would be decomposed into oxygen and hydrogen ...and the result would be that the water would continually flow in, and yet the tank would remain entirely empty, the gases formed escaping.
We would thus produce, by expending initially a certain amount of work to create a sink for...the water to flow in, a condition enabling us to get any amount of energy without further effort.
Tesla recognized that no energy conversion system would be perfect, some water would always get into the tank, but,
"there will be less to pump out than flows in, or, in other words, less energy will be needed to maintain the initial condition than is developed [by the incoming water], and this is to say that some energy will be gained from the medium."
He found that this pumping could be done with a piston "not connected to anything else, but was perfectly free to vibrate at an enormous rate." This he was able to do with his "mechanical oscillator," a steam-driven engine used for producing high frequency currents. The faster the pump would work, the more efficient it would be at extracting energy from the cosmos.
Research along this line culminated in the oscillator demonstrated at the Chicago World's Fair in 1893.
Tesla’s Personal Exhibit at the 1893 Columbian Exposition Chicago, Illinois Tesla’s expertise with alternating currents and flair for showmanship educated the general public and insured his prominence in the electrical energy field. In addition to numerous demonstration motors, the booth was highlighted by the infamous “Egg of Columbus”in which a spinning egg illustrated the rotating magnetic field:
"On that occasion I exposed the principles of the mechanical oscillator, but the original purpose of this machine is explained here for the first time."
It was also in 1893 that Tesla applied for a patent on an electrical coil that is the most likely candidate for a non-mechanical successor of his energy extractor.
This is his "Coil for Electro-magnets,". It is another curious design because, unlike an ordinary coil made by turning wire on a tube form, this one uses two wires laid next to each other on a form but with the end of the first one connected to the beginning of the second one.
US Patent 512,340 Coil for Electro-Magnets - Nikola Tesla - July 9, 1894:
In the patent Tesla explains that this double coil will store many times the energy of a conventional coil.
Preliminary measurements of two helices of the same size and with the same number of turns, one with a single, the other with a bifilar winding, show differences in voltage gain.
In below figure, the upper curve is from the Tesla design, the lower was produced by the single wound coil.
Preliminary measurements of two helices of the same size and with the same number of turns, one with a single, the other with a bifilar winding, show differences in voltage gain. The upper curve is from the Tesla design, the lower was produced by the single wound coil. The patent, however, gives no hint of what might have been its more unusual capability:
The patent, however, gives no hint of what might have been its more unusual capability.
Energy Conversion
In the Century article Tesla compares extracting energy from the environment to the work of other scientists who were, at that time, learning to condense atmospheric gases into liquids. In particular he cited the work of a Dr. Karl Linde who had discovered what Tesla described as a "self-cooling" method for liquefying air.Linde’s Condenser - An article - Illustrative image for "converts energy in Aether - Radiant Energy":
As Tesla said,
"This was the only experimental proof which I was still wanting that energy was obtainable from the medium in the manner contemplated by me."
What ties the Linde work with Tesla's electromagnet coil is that both of them used a double path for the material they were working with. Linde had a compressor to pump the air to a high pressure, let the pressure fall as it traveled through a tube, and then used that cooled air to reduce the temperature of the incoming air by having it travel back up the first tube through a second tube enclosing the first.
The already cooled air added to the cooling process of the machine and quickly condensed the gases to a liquid.
The earth, on the other hand, is charged with negative electricity.
The tremendous electrical force between these two bodies constituted, at least in part, what he called cosmic energy. It varied from night to day and from season to season but it is always present.
The positive particles are stopped at the ionosphere and between it and the negative charges in the ground, a distance of 60 miles, there is a large difference of voltage - something on the order of 360,000 volts.
With the gases of the atmosphere acting as an insulator between these two opposite stores of electrical charges, the region between the ground and the edge of space traps a great deal of energy.
Despite the large size of the planet, it is electrically like a capacitor which keeps positive and negative charges apart by using a non-conducting material as an insulator.
The earth has a charge of 90,000 coulombs. With a potential of 360,000 volts, the earth constitutes a capacitor of .25 farads (farads = coulombs/volts).
If the formula for calculating the energy stored in a capacitor (E = 1/2CV2) is applied to the earth, it turns out that the ambient medium contains 1.6 x 1011 joules or 4.5 megawatt-hours of electrical energy.
In order to tap this energy storehouse Tesla had to accomplish two things - make a "cold sink" in the ambient energy and devise a way of making the "sink" self-pumping.
Explaining how this process might have worked requires, again, speculation.
Such a "sink" would have to be at a lower energy state than the surrounding medium and, for the energy to continually flow into it, the "sink" would have to maintain the lower energy state while meeting the power requirements of the load attached to it. Electrical energy, watt-seconds, is a product of volts x amps x seconds. Because the period of oscillation does not change, either voltage or current has to be the variable in the coil's energy equation.
In that the double wound coil maximizes the voltage difference between its turns, it is probable that it is the current that is minimized to produce a low energy state in the coil. For the coil to be initially "empty" and at low energy would mean it operated at high voltage with a small amount of charge.
The coil, then, would be set into oscillation at its resonant frequency by an external power source. During a portion of its cycle the coil will appear to the earth's electric field as one plate of a capacitor. As the voltage across the coil increases, the amount of charge it can "sink" from the earth's higher energy field will increase.
The energy taken into the coil - through the "small opening" which appears to be the atomic structure of the conductor according to the physics of Tesla's time - is "condensed" into positive and negative components of current, a lower energy state relative to the originating field.
The current is equivalent to the water converted to gases in Tesla's description of the self-acting engine. The current would "escape" from the "sink" into whatever load was connected across the coil. The movement of current into the load would produce a strong magnetic field (the stated intention of the patent) which, when it collapsed, would, again, produce a high potential, low charge "sink" to couple with the earth's electric field.
Because the inflowing energy performs a double function similar to the unipolar generator, supplying current to the load and aiding the pumping function, the system's energy expenditure in moving charge is low, allowing the system to gain more energy from the medium than it expends in its operation. The coil needs no extra energy from an outside source to pump the energy it has extracted.
Energy would come directly from the sun.
A more modern view of such a device, should it prove to operate in this theoretical manner, would be to describe it as a self-oscillating capacitive system. Once the device is set into oscillation, very little power is expended in driving the load. Because it is an electrostatic oscillating system, only a small amount of charge moves through the load per cycle, that is, the coulomb per seconds = amps are low.
If the charge is used at a low rate, the energy stored in the capacitive system will be turned into heat at a slow rate enabling the oscillations to continue for a long period of time.
With his prominent position in the world of science at the time, it is curious why Tesla's invention was not commercialized or at least publicized more. Economics, not science, appear to have been the main factor. The adoption of alternating current was opposed by powerful financiers of the period.
Michael Pupin, another leading electrical researcher at the turn of the century, noted in his autobiography:
...captains of industry...were afraid that they would have to scrap some of their direct current apparatus and the plants for manufacturing it, if the alternating current system received any support... ignorance and false notions prevailed in the early nineties, because the captains of industry paid small attention to highly trained scientists.
Tesla's patents for electrical generators and motors were granted in the late 1880's.
During the 1890's the large electric power industry, in the form of Westinghouse and General Electric, came into being. With tens of millions of dollars invested in plants and equipment, the industry was not about to abandon a very profitable ten year old technology for yet another new one.
Tesla saw that profits could be made from the self-acting generator, but somewhere along the line he had pointed out to him the negative impact the device would have.
At the end of the section in Century where he described his new generator he wrote:
I worked for a long time fully convinced that the practical realization of the method of obtaining energy from the sun would be of incalculable industrial value, but the continued study of the subject revealed the fact that while it will be commercially profitable if my expectations are well founded, it will not be so to an extraordinary degree.
Years later, in 1933, he was more pointed in his remarks about the introduction of his fuelless generator. In the Philadelphia Public Ledger of November 2nd, is an interview with Tesla under the headline "Tesla 'Harnesses' Cosmic Energy."
In it he was,
"Asked whether the sudden introduction of his principle would upset the present economic system, Dr. Tesla replied, 'It is badly upset already.' He added that now as never before was the time ripe for the development of new resources."
It has been nearly a century since Nikola Tesla claimed a radically new method for producing electricity. The need for the development of new resources is greater now than at the end of the last century.
Perhaps these overlooked inventions will make his vision of "increasing human energy through the use of the sun's energy" become a reality.
Tesla has found a technology for wireless energy transmission - Luminiferous Aether - Aether Engine
In today’s world, the closest discovered phenomenon that would compare to what Tesla spent his life in solving and harnessing is what we call ‘zero-point energy’ (ZPE). So, what is ZPE? I will let Marc Millis, a physicist, former head of NASA’s Breakthrough Propulsion Project (BPP) answer this question when asked by Nick Cook:Presuming, if Tesla was working with ZPE he used a different name for it, calling it Luminiferous Aether, it represented a more gaseous structure verses any electron particle phenomenon. He was not using any kind of generator, transferring mechanical energy to electricity; instead he called it an Aether engine, transferring Aether energy into electricity. His engine was technology to draw the Aether (ZPE) from space with a tower receiving device and transferring it under the ground deep to broadcast it throughout the Earth.
It being stupid to believe he would have ever considered it to be broadcasted in the air, it already existed in the air and would probably interact. This energy having no electron properties, therefore lacking its limitations also, no degeneration with distance, faster than the speed of light, transfers through everything; it has no physical properties at all. Tesla’s Aether verses ZPE could be nothing more than terminology, i.e. mine vs. harness, generator vs. engine. Physics likes to think the errored Michelson Morley experiment put an end to the Aether, which any 2nd grader could debunk the results, and now ZPE smelling a lot like what Tesla was developing his wireless energy with.
"Secrets of Cold War Technology" by Gerry Vasilatos (free pdf on line) explains his discovery of Ether, how it did not behave as electricity when he first separated it. How it could be amplified and then converted back into electricity.
In the court transcripts during the patent suit by GE/JPMorgan vs. Westinghouse/Tesla, Tesla testified that his Transformer amplified electricity 5,000 times, and was self-powered. (available on the PBS website) He also shifted the phase of magnetism passing through his motor, eliminating "lenz's law". Something TC Heins re-invented.
Aether, defines space... it is infinite and omnipresent. When Tesla created beams of Ether that was patterned after electricity, it was superliminal (traveled through Aether as if Aether is superconducting), and also like a venturi, drew more Ether into the propagating wave, he called them stationary waves to differentiate the compression Ether waves from RF transverse standing wave patterns.... So, Ether beams were transmitted instantly, and were self-amplifying while powered. No distance limitations of time delay or loss of energy.
A proper Tesla Coil is optimized to resonate the Ether waves, not electricity. Current designs used today based on RF waves are hopelessly doomed to fail to replicate his proven transmission distances which exceeded 25 miles. That was further than any wire transmission could pump AC power, his closest competitor. He understood, that no energy was lost through resistance, dissipation, or obstructions in those tests... The beams were actually self-amplifying... distance from source to receiver on the planet was irrelevant. Just as the Sun controls Pluto, distance is irrelevant.
Tesla's Radiant Energy - Cold Electricity from Tesla Coils:
Tesla has found a technology for wireless energy transmission
Tesla's wireless energy transmission is a conductor-less power transmission, meaning there is a power supply and a place to collect electricity, without a wire. In essence, this is a "chess" of Tesla with the electric industry and investors. Tesla has discovered how to transmit electricity without wires and then how to harness energy from "invisible". Tesla anticipates that its invention will not be commercialized. So, Tesla wants to create a power supply, then wireless power transmission, cheaply for mankind. So he needs investors. Of course, this battle is a game of chess, which the original moves were not allowing to expose "free energy" technology. Tesla is very intelligent, but his kindness to humanity has been discovered, and this game Tesla lost.
The starting event, which is an unexplainable event - is always ahead of the theory: the phenomenon of closing the DC breaker at the generator station, causing the voltage to rise thousands of times in an instant. Tesla did not use the scientific knowledge to explain this phenomenon, his goal was to solve the problem of unidirectional electric impulses and Aether - routing electrical impulses for Aether. Tesla was right, because with the foundation of electrical impulses and Aether, Tesla invented the hairpin circuit, and later the Tesla Coil. Both the Tesla hairpin circuit and coil are capable of wireless electrical transmission. But the electricity that is transmitted here is not ordinary electricity, but electricity without the diversion of electrons, and it is called Cold Electricity. At the output of a hairpin circuit or Tesla coil, there is a form of radiant electricity, and it is transmitted without wires, which is also called radiant energy. Relationship between radiant energy and Cold Electricity: Tesla’s Radiant Energy
Free Energy
Tesla has figured out how to harness energy from nothing, everywhere in the universe. The evidence is legendary cars, and flying saucers without Tesla's jet engine.
Tesla has found a way to harness energy from nothing, everywhere in the universe, which is free energy. The evidence is legendary cars, and flying saucers without Tesla's jet engine. Tesla wanted his technology to be commercialized, so he played a game of energy (as mentioned above).
Tesla's free energy is taken from within Aether. The way of extracting energy is like extracting a file, In Aether, containing the energy file, the problem is how to extract it. The universe in Aether seems to be the information universe, meaning matter is also information. But this is only an inference.
Tesla's free electricity can be exploited anywhere in the universe, and can be transmitted through any material - even the earth - in a way that regulates frequency and decompresses energy files. Wireless power transmission on earth: Exploiting Electricity from the Earth's charge - Wireless Power Transmission
C. The blueprint for Tesla Generator Homemade by anonymous scientists - Disciple of Tesla
A science project about home-made generators - but it went live:It was a brief introduction video - a demonstration of a free energy program by a group of anonymous scientists.
Note. Some scientists are famous for free energy (still alive):
- John Bedini
- Peter Lindemann: Excepts from “Thermodynamics and Free energy” by Peter Lindemann
- Eric Dollard
- Jim Murray
And more...
They work for private companies and write books for sale to engineers who study free energy.
Some famous people research on free energy - including Disciple of Tesla, you can see them here: https://ultimate-energizer.blogspot.com/p/free-energy-books.html - Bookstore and video about green energy
Tesla Generator Homemade by anonymous scientists - Disciple of Tesla:
You are about to visit a program for free energy researchers and ordinary people...
Revealed At Last: Ancient Invention Generates Energy-On-Demand
✔ Nikola Tesla’s method of magnifying electric power by neutralizing the magnetic counter-forces in an electric generator
Generates Energy-On-Demand: Easy Power Plan Will Change Our World Forever
✔ Currents are 180 out of phase with each other, Lenz's law naturally is broken
✔ Principle of Resonance to achieve Overunity
Most of today’s physicists do not have a clue what was behind Tesla’s experiments and how the wireless energy technology operated. They use their object trained science trying to understand what someone using the full natural science was developing. It is like trying to bake a cake without the recipe!
Free energy exists all around us, it just costs us resources to convert into applicable properties for human consumption. This is what Tesla’s wireless energy project was destined to do. All one would have needed to do is stick a rod in the ground and use Tesla’s technology to covert the energy into electricity. Unfortunately, it would have upset the entire world’s economy at that period, and still would have a major effect if implemented today.
All that was great in the past was ridiculed, condemned, combated, suppressed — only to emerge all the more powerfully, all the more triumphantly from the struggle. - Nikola Tesla
------------------------------------------------------
Free energy exists all around us, it just costs us resources to convert into applicable properties for human consumption. This is what Tesla’s wireless energy project was destined to do. All one would have needed to do is stick a rod in the ground and use Tesla’s technology to covert the energy into electricity. Unfortunately, it would have upset the entire world’s economy at that period, and still would have a major effect if implemented today.
All that was great in the past was ridiculed, condemned, combated, suppressed — only to emerge all the more powerfully, all the more triumphantly from the struggle. - Nikola Tesla
------------------------------------------------------
References:
- Electromotive force ( EMF): https://en.wikipedia.org/wiki/Electromotive_force
- Unravel Secret Tesla Generator - Mechanical Self-Sustaining Generator: https://ultimate-energizer.blogspot.com/2019/07/secret-tesla-generator-self-sustaining.html
- The Wardenclyffe project: https://teslaresearch.jimdofree.com/wardenclyffe-lab-1901-1906/
- Tesla vs. Einstein: The Ether & the Birth of the New Physics: https://www.newdawnmagazine.com/articles/tesla-vs-einstein-the-ether-the-birth-of-the-new-physics
- Does Aether exist according to modern physics: https://www.quora.com/Does-Aether-exist-according-to-modern-physics
